Français
text.skipToContent text.skipToNavigation

CRL Poignée de tirage incurvée, fixation sur verre, 305 mm (12 po), acier inoxydable poli

Finition/Couleur : Polished Stainless Steel
Article # : CC12X12PS
View Prices with a Purchase Account
Quantité minimum de commande :1
Unité de Mesure :par pièce

Poids d'expédition : 1.26 Pounds
Limitations d'expédition : Aucun
Conformité et restrictions
Avertissement d'atteinte à la reproduction - www.p65warnings.ca.gov
CRL Poignée de tirage incurvée, fixation sur verre, 305 mm (12 po), acier inoxydable poli
×
CRL Poignée de tirage incurvée, fixation sur verre, 305 mm (12 po), acier inoxydable poli
Quantité Prix standard Prix de vente Ton prix
CRL Poignée de tirage incurvée, fixation sur verre, 305 mm (12 po), acier inoxydable poli Stock
Emplacement de la succursale DISPONIBILITÉ DES STOCK
Los Angeles, California 23
Dallas, Texas 5/17/2024
Chicago (Elgin), Illinois 5/17/2024
San Francisco/Oakland (Union City), California 5/16/2024
Atlanta, Georgia 5/20/2024
New York Area (Secaucus, New Jersey) 5/20/2024
Boston (Taunton), Massachusetts 5/20/2024
Orlando, Florida 5/21/2024
Denver, Colorado 5/21/2024
Seattle (Kent), Washington 5/21/2024
Cleveland (Solon), Ohio 5/17/2024
Philadelphia Area (Moorestown, New Jersey) 1
Phoenix, Arizona 5/16/2024
Las Vegas, Nevada 5/16/2024
Houston, Texas 5/17/2024
Miami, Florida 5/21/2024
San Diego, California 5/15/2024
Carolinas and Virginia, South Carolina 5/21/2024
Détails du produit
  • Diameter
    1 in. (25 mm)
  • Finish/Color:
    Polished Stainless Steel
  • Glazing Thickness
    3/8 in. To 3/4 in. (10 mm To 19 mm)
  • Material
    Stainless Steel
  • Mounting Center To Center
    12 in. (305 mm)
  • Mounting Hole Diameter
    5/8 in. (16 mm)
  • Mounting Type
    Back-to-Back
  • Style Washer Diameter
    1-1/4 in. (32 mm)
  • Style Washers
    Yes
Présentation du produit
  • For Use with: 3/8" to 3/4" (10 to 19 mm) Glass
  • 1" (25.4 mm) Diameter Stainless Steel or Brass Tubing
  • Use Monolithic Tempered Glass

Cette poignée de tirage incurvée CRL, fixée sur verre, est disponible dans plusieurs finis. DONNÉES TECHNIQUES Comprend :
  • un kit de poignée de tirage CC12X12 (montage dos à dos)
  • deux boulons traversants par poignée pour fixation sur verre
  • quatre rondelles métalliques de 32 mm (1-1/4 po) de diamètre par poignée, avec joints (fini assorti) Pour : 
  • verre de 10 mm (3/8 po) d'épaisseur
  • verre de 19 mm (3/4 po) d'épaisseur Construction :
  • Tubes en acier inoxydable ou en laiton de 25 mm (1 po) de diamètre Façonnage du verre nécessaire :
  • Deux orifices de 16 mm (5/8 po) de diamètre, entraxe de 305 mm (12 po)
    SPECIFICATIONS:
    For Use With: 3/8" to 3/4" (10 to 19 mm) Glass
    Construction: 1" (25 mm) Diameter Stainless Steel or Brass Tubing
    Glass Fabrication Required: Two 5/8" (16 mm) Diameter Holes

    INCLUDES:
    2 Each: Through-Bolts for Glass Mounting
    4 Each: 1-1/4" (32 mm) Diameter Matching Finish Metal Washers and Rubber Gaskets

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

    Stainless Steel Advisory:
    Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
  • Références techniques et dessins CAO