- Adjustable Pivot Insert Allows Three Degrees Movement for Proper Door Alignment
- 2-9/16" (65 mm) Pivot Setback
- For 3/8" or 1/2" (10 or 12 mm) Glass
La
plaque de suspension du haut réglable CRL comprend un tampon de pivot réglable qui permet un mouvement de 3 degrés afin d'obtenir un alignement approprié de la porte, en position fermée, par rapport à l'huisserie. Conçue pour notre ferme-porte encastré
CRL9970. Les plaques de recouvrement sont disponibles dans cinq finis standard. Les joints fournis permettent d'utiliser cette
plaque de suspension avec du verre de 10 ou 12 mm (3/8 ou 1/2 po) d'épaisseur.
Intervention sur le verre requise : un orifice de 19 mm (3/4 po) de diamètre et une encoche d'angle.
If the door exceeds any of these limitations, full door rails should be used.
GLASS FABRICATION REQUIRED:One 3/4" (19 mm) Diameter
Hole and Corner Notch
COMES WITH:Template and Instructions
Product Warning:These fittings are not for use with Laminated Glass.
The following guidelines are to be used when making a 1/2" glass door using this hardware:
Maximum Height: 102" (2.59 m)
Maximum Height: 176 Lbs. (80 kg)
Maximum Width: 42" (1.09 m)
If the door exceeds any of these limitations, full door rails should be used.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Imprimer
