- For 3/8" or 1/2" (10 or 12 mm) Glass
- 2-3/4" (70 mm) Pivot Setback
- For Use with Overhead Concealed Door Closers
- Use Monolithic Tempered Glass
La
plaque de suspension du haut CRL comprend un tampon
1NT304 conçu pour nos
ferme-portes encastrés dotés d'un axe carré de 14 mm (9/16 po) et de 19 mm (3/4 po) de long. Les plaques de recouvrement sont disponibles dans cinq finis standard. Les joints fournis permettent d'utiliser cette
plaque de suspension avec du verre de 10 ou 12 mm (3/8 ou 1/2 po) d'épaisseur.
Intervention sur le verre requise : un orifice de 19 mm (3/4 po) de diamètre et une encoche d'angle.
Glass Fabrication Required: One 3/4" (19 mm) diameter hole and corner notch.
Product Warning:These fittings are not for use with Laminated Glass.
The following guidelines are to be used when making a 1/2" glass door using this hardware:
Maximum Height: 102" (2.59 m)
Maximum Weight: 194 Lbs. (80 kg)
Maximum Width: 42" (1.09 m)
If the door exceeds any of these limitations, full door rails should be used.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Brass Finish Advisory:
Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored. For more information, view the Brass Finish Disclaimer found in the Technical References section below.