- Accommodates Up to a 40" (1.02 m) Vertical Suspension from Structure
- Provides Fine-Tune Adjustment
Le
kit de support extensible pour SCE est utilisé lorsque le substrat de montage est éloigné de 1,01 m (40 po) de la partie supérieure du caisson d'entraînement pour SCE. Chaque kit contient un support de fixation supérieur en acier, un support de fixation inférieur en aluminium, deux tiges de suspension de 9,5 mm (3/8 po)-16 x 1,01 m (40 po) de long, de long, un boulon de fixation de rail de 9,5 x 32 mm (3/8 x 1-1/4 po)-16, neuf écrous hexagonaux de 9,5 mm (3/8 po)-16, neuf rondelles plates et cinq rondelles frein. Le support de fixation supérieur nécessite une pièce de fixation simple (non fournie) pour l'attacher au substrat. En cas de fixation sur acier, il peut être soudé. Peut être supprimé grâce à la fixation de tiges de suspension directement au substrat en acier. Demandez conseil auprès d'un ingénieur civil.
REMARQUE : Si le substrat de montage est placé à plus de 152 mm (6 po) de la partie supérieure du caisson d'entraînement pour SPS, des
kits de support angulaire CRL référence 90TSA1 doivent être utilisés afin de stabiliser l'ensemble du caisson d'entraînement pour SCE.
The Upper Mounting Bracket requires a single fastener (not supplied) to attach it to the substrate, or if mounting to steel, it can be welded. It can also be eliminated by attaching Suspension Rods directly to the steel substrate. Consult a structural engineer for recommendations.
NOTE: When mounting substrate is over 6" (152 mm) from the top of the SPS Overhead Track, CRL Cat. No. 90TSA1
Angled Support Assemblies must be used to stabilize the entire SPS Overhead Track.
Product Warning:STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.