- Continuous Integral EPDM Shim
- 100% Solids Content
- Used in Compression Glazing Systems
- Meets AAMA 800-92, 804.3, 806.3, and 807.3
- Black Color
Le ruban CRL Tremco® POLYshim est un ruban en butyle réticulé hautement adhésif et élastique ; il est tout à fait solide. L'utiliser dans les systèmes d'étanchéification de vitrage lorsque la conception exige un vitrage haute performance des murs-rideaux, des murs-rideaux unifiés, des systèmes de fenêtre à perforation et à ruban et des applications de vitrage en pente. Il empêche également tout bris de verre en supprimant les points de pression dus à un réglage incorrect. Le ruban Tremco® POLYshim offre une bonne adhérence, une résistance à la chaleur, une compatibilité avec les scellants et une résistance aux intempéries. Il peut être utilisé avec de nombreux systèmes de vitrage. DONNÉES TECHNIQUES : Températures admissibles en service : -54 à 93 °C (-65 à 200 °F) Température d'application : - 7 à 49 °C (20 à 120 °F). Durée de stockage : 12 mois dans des conditions de stockage normales inférieures à 27 °C (80 °F). 12,2 m (40 pieds) par rouleau ; 243,8 m (800 pieds) par caisse.
The continuous rubber shim works to prevent sealant squeeze-out because it is resilient to pressure exerted by building and glass expansion or contraction. It also helps prevent glass breakage by eliminating pressure points created by improper shimming. The continuous shim eliminates the need for preshimming the lite before installing the tape. Tremco® Pre-Shimmed tape has good adhesion, heat resistance, sealant compatibility, and resistance to weathering. It can be used in conjunction with many glazing systems.
Typical Physical Properties
Base Polymer: cross linked butyl rubber (polyisobutylene); Solids Content: 100% by weight. Hardness: 57 durometer Shore "00". Temperature Range: Application 20°F (-7°C) to 120°F (49°C); Service -65°F (-54°C) to 200°F (93°C). Weathering: Unaffected by Ultraviolet through glass. Remains flexible at low temperatures.
Applicable Standards
POLYshim™ II Tape meets the requirements of AAMA 800-92 Specifications 804.3, 806.3, and 807.3.
Limitations
Not for use in joints subjected to continuous water immersion or temperatures exceeding 200°F (93°C). Do not compression glaze glass with POLYshim™ II Tape having less than an 1/8" (3 mm) shim.
Product Warning:Limitations: Not for use in joints subjected to continuous water immersion or temperatures exceeding 200°F (93°C). Do not compression glaze glass with POLYshim™ II Tape having less than an 1/8" (3 mm) shim.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Imprimer